If you have a boat lift, it’s important to know how to position your boat on it correctly. Incorrect positioning can damage your boat or the lift, and can even be dangerous. In this post, we’ll explain how to properly place your boat on a lift. We’ll also provide some tips for avoiding common mistakes.
How to Properly Align a Boat When Storing It on a Lift
It is important to take the time to ensure that your boat is properly aligned when storing it on a lift. This will help to avoid any damage to the boat, as well as making it easier to access and use when you are ready to take it out again. Here are a few tips on how to properly align a boat when storing it on a lift:
1. Use chocks to secure the boat in place. Chocks can be placed at the front and back of the hull, or under the tires if the lift has them. This will help to keep the boat from moving around while it is being stored.
2. Make sure that the straps or chains that are used to secure the boat are tight and not loose. If they are too loose, the boat could shift and cause damage.
3. Check the level of the lift before storing the boat on it. You want to make sure that the lift is level so that the boat will be stored evenly and not at an angle.
4. Take care when loading or unloading the boat onto the lift. Make sure that you do not hit the hull against anything, as this could cause damage. Be careful of any sharp edges on the lift, as well.
5. Inspect the boat regularly while it is being stored on the lift. This will help you to catch any problems that might arise, such as straps coming loose or chocks falling out of place.
The following are five helpful tips for loading watercraft into a boat lift and positioning them properly
First and foremost, learn your lift.
Each model is a little different, so it’s important to know its capabilities and limitations.
Positioning the boat on the lift can be tricky. You want to avoid any objects that could potentially puncture the hull, so take extra care when maneuvering around docks, pilings and other boats. It’s also important not to scrape or damage the hull while loading or unloading.
Depending on the size and weight of your watercraft, you may need additional support. Most lifts come with adjustable bunks or cradles that can be positioned to best support your boat.
Once your boat is in place, use wheel chocks (if included) or ratchet straps (if not) to secure it to the lift. This will help prevent it from shifting or tipping while in storage.
regardless of how you position your boat on the lift, make sure it’s stable and secure before leaving it unattended.
Check the level of your lift regularly, especially after heavy rains or storms. If the ground beneath the lift has shifted, it could cause the lift to become unlevel, which could lead to serious damage.
If you follow these tips, you can help ensure that your boat is properly positioned and secured on its lift, helping to avoid any potential damage.
Checking your speed is the second piece of advice I have.
You want to be sure not to go too fast when you’re approaching the dock or the lift. Many people think that they need to get their boat up to speed in order to make it onto the lift, but this can actually cause damage.
If you come in too fast, you could hit the bumper of the lift, which could cause serious damage. You also run the risk of hitting other boats or objects if you’re going too fast. So take your time and approach slowly.
Approaching at an angle is another common mistake people make when trying to position their boat on a lift.
They think they need to line up perfectly with the center of the lift, but this can actually make it more difficult to get on. Instead, approach at a slight angle and then turn into the center of the lift. This will help you line up better and make it easier to get on.
Finally, be sure to use chocks or straps to secure your boat once it’s in position on the lift.
This will help prevent it from shifting or tipping while in storage. And if you follow these tips, you can help ensure that your boat is properly positioned and secured on its lift, helping to avoid any potential damage.
The third piece of advice: drill your positioning.
Just like with any skill, the more you do it, the better you’ll get at it. So find a quiet spot on the lake and practice positioning your boat onto the lift.
It might take a few tries to get it right, but eventually you’ll get the hang of it. And when you do, you can be confident that you’ll be able to position your boat properly when it really counts.
Tip #4: Keep an eye out for the wind
The wind can be your friend or your enemy when it comes to positioning your boat on a lift.
If the wind is blowing towards the shore, it will help you push your boat into position. But if the wind is blowing away from the shore, it will make it more difficult to control your boat.
So before you attempt to position your boat on the lift, take a look at the direction of the wind and adjust your approach accordingly.
Tip #5: Learn to Ride the Wave of Momentum
This tip is especially important if you’re docking a larger boat.
As you approach the dock, you’ll likely have some forward momentum. And if you can learn to ride this wave of momentum, it will help you position your boat more easily.
To do this, start by Approaching the dock at a slow speed. Then, as you get closer, increase your speed slightly and then turn into the dock. This will help you line up better and make it easier to get on.
Are You Guilty of Committing Any of These Common Boat Lift Mistakes?
Improper Weight Distribution Within Your Boat
One of the most common mistakes people make is not distributing the weight evenly within their boat. This can lead to serious problems, such as your boat tipping over or shifting on the lift.
To avoid this, be sure to distribute the weight evenly throughout your boat. This includes both people and cargo. And if you have a lot of gear or supplies onboard, be sure to store them in a way that doesn’t throw off the balance of your boat.
Putting the Weight Capacity to One Side
Another common mistake is putting too much weight on one side of the lift. This can cause the lift to tip over, and it can also damage the lift itself.
To avoid this, be sure to distribute the weight evenly across the lift. This means placing people and gear in both the front and the back of the boat. And if you have a lot of weight onboard, be sure to place it in the center of the boat so that it’s evenly balanced.
Neglecting the Upkeep of Your Cables
One of the most important parts of a boat lift is the cable. This is what keeps your boat in place and prevents it from tipping over.
However, many people neglect the upkeep of their cables. Over time, the cables can become worn or frayed, which can lead to them breaking.
To avoid this, be sure to regularly inspect your cables and replace them if necessary. This will help ensure that your boat is properly secured and prevent any accidents from happening.
Having Lost Track of the Lifting Height
When you’re positioning your boat on the lift, it’s important to keep track of the lifting height. This is because if the lifting height is too high, it can cause your boat to tip over.
To avoid this, be sure to lower the lifting height gradually. And if you’re not sure how high to go, err on the side of caution and stop before you reach the point where your boat might tip over.
F.A.Q about “How to position boat on lift”
How large of a boat is possible to hoist into a lift?
Hydraulic Lifts. Boats that are up to 24 feet in length can be lifted and supported by these aluminum hydraulic lifts. It is common to see surf boats, wake board boats, inshore fishing boats, day cruisers, and pontoon boats constructed using these hulls.
Is it safe to keep the boat lift submerged in the water?
If you reside in a region where ice movement is widespread, leaving your boat lift in the water could result in damage from freezing temperatures, which could be especially problematic for your boat lift. A wheel kit from ShoreMaster can make removing a boat lift as simple as rolling it out of the water. Your boat lift can simply sit on those wheels or its pads if you get the wheel kit.
How much space should there be between each bunk in the Boat Lift?
32-36 inches on center, depending on the location of the high-speed water pickup on your system. FYI, check out the service areas of any and all Marine dealerships; you’ll see that the bunks there are all spaced the same way.
How do you go about setting up the bunks in the trailer?
Adjusting The Bunkhouses
- Take off any keel rollers, guides, or anything else that is in contact with the keel.
- Unhook your winch strap from the bow eye, then slide the winch stand forward just a little bit so that you have some room to move around.
- Make the necessary adjustments to the bunks so that the chines on your hull are supported by the bunks.
How much does the weight of an aluminum boat lift depend on its size?
Written by ShoreMaster Marketing
Larger hydraulic boat lifts weigh between 900 and 1,200 pounds, depending on their size. Aluminum construction ensures that ShoreMaster boat lifts are not only long-lasting but also lightweight, require little in the way of upkeep, and are simple to both set up and maintain.
When positioning your boat on a lift, it is important to keep a few things in mind. First, make sure that the bow and stern are even with each other. Next, adjust the height of the boat so that the waterline is at least 1” below the dock level. Finally, use straps or ropes to secure your boat in place.
By following these tips, you can safely and securely position your boat on a lift. This lakecityswitchbacks.com post will show the information about “How to position boat on lift?”
- how to position pontoon on lift
- how to board a boat on a lift
- how far apart should bunks be on a boat lift
- how to store a boat on a lift
- leave boat lift up or down
- boat lift bunk placement
- how to drive a boat on a lift
- how to secure a boat on a lift